Holcom MR1 is a special design for the installation of pv power plant on trapezoidal roof. It has adopted the self-tapping screw to stick into purlin, which has increased the strength of the whole system. Different purlin can use equivalent self - tapping screws, which can offer more convenience, economical and safe installation.

• ​Product code: HOL.MR1-00
  Brand: HOLCOM
  Port of export: HaiPhong, Vietnam
  Tilt angle: 0°~60°
  Installation area: Corrugated iron roof, trapezoidal waves
  HS Code: 76109000

Specifications

• Materials: AL6005-T5 / AL6005-T6/ SUS304
  Surface treatment: Silver anode with thickness from 6μm to 18μm. Hot-dip galvanized layer (if any) has a thickness of ≥ 65μm
  Battery type application: With frame
  Wind load: ≤60m/s
  Snow load: 1.4KN/m2
  Battery installation direction: Horizontal/Vertical
  Tilt angle: 0°~60°
  Seismic coefficient: Lateral seismic coefficient: Kp = 1; seismic coefficient: Z = 1; Usage coefficient: I = 1
  Standard: JIS C8955:2017 / ISO 9001:2015 / TCVN 6781-1-1:2017 / SGS​

Structural details​

Installation steps​